How do I add load balance to my router?

How do I add load balance to my router?

Choose the menu Transmission> Load Balancing > Basic Settings to load the configuration page. Enable Load Balancing globally, and click Save. Enable Application Optimized Routing, and enable Bandwidth Based Balancing Routing on WAN1 port and WAN2 port. Click Save.

What is load balance broadband router?

A load balancing router optimizes and improves network bandwidth speed, overall performance and Internet redundancy through several techniques, such as bandwidth aggregation, used to bond the bandwidth capacity of DSL, cable, T1 or any other Internet connection.

How do I load a TP Link?

Setup the Hardware

  1. Unpack the TP-Link router and screw on the external antennas (if the unit has them).
  2. Turn off your computer’s Wi-Fi, if it is on.
  3. Plug the Ethernet cable into one of the switch ports (usually yellow in color), then plug the other end of the cable into your computer’s Ethernet port.

Does a load balancing router increase speed?

Dual-wan (multi-wan) routers, a.k.a. load balancers, allow you to use multople internet connections, and will generally double the overall throughput of your network, however, they will not increase the download speed of a single connection, or a single download.

Can you plug a router into a TP-Link?

Connect your modem to the WAN port of the TP-Link router via an Ethernet cable; connect a computer to TP-Link router’s LAN port via an Ethernet cable. 3. Power on your router and computer first and then modem.

How do I add a TP-link router to an existing network?

Select Wireless->Wireless Settings on the left side, enter a SSID for the name of the wireless network and select a channel. Save and reboot the router. Connect your computer to the other wireless router, and repeat the Step 1 and step 2, after reboot both of the two routers, the wireless connection will be set up.

Why do routers have 2 WAN ports?

Dual-WAN or multi-WAN routers give you reliable Internet at all times coupled with load balancing and security. They are most essential for those who are likely to get impacted even with short Internet outages and for those who want to combine the bandwidth of two or more providers.

What this product does the tl-r470t+ load balance broadband router do?

What this product does the TL-R470T+ load balance broadband Router is a wise choice for small business. It brings you high return on investment with low overhead. Featuring three changeable WAN/LAN ports, TL-R470T+ supports up to 4 WAN ports, which can satisfy various Internet access requirements through one device.

How to set the number of WAN ports on tl-r470t+? WAN Mode TL-R470T+ provides four available WAN ports. You can set the number of WAN ports on this page. Choose the menu Network WAN

How do I set up No-IP DDNS for tl-r470t+ load balance?

TL-R470T+ Load Balance Broadband Router User Guide 65 Figure 4-60 To set up for No-IP DDNS, follow these instructions: Step 1 S elect the WAN port to configure. Step 2 T ype the “User Name” and “Password” for your DDNS account. Step 3 E nter the Domain Name your dynamic DNS service provider offered. Step 4 E nable DDNS, and click Save

What are the dimensions of the TP-Link R470?

TL-R470T+ TP-link R470 2011 21.08 x 2.79 x 12.7 cm; 110 Grams TL-R470T+ 4 TL-R470T+, Power Cord, RJ-45 Ethernet Cable, Quick Installation Guide and Resource CD