How do you get a plumbing snake unstuck in the toilet?

Hold the handle of the drain snake to the side as you pour half a bottle of drain-cleaning gel down the drain, following this with the pots of boiling water. Wait 10 minutes, then turn the snake on, first in forward then reverse, to remove it from the softened blockage, which should disperse as the snake is removed.

How do you get a trap snake past a toilet?

If you suspect the snake is getting stuck in a corner, try operating the crank in reverse. This makes the head wobble back and forth, but because you’re cranking counterclockwise, it can’t collect any debris. If the bend in the pipe is really at fault, the wobbling of the head should help the snake clear the corner.

How do you Unkink a drain snake?

Take the snake in two hands, one at each end, and give the cable a strong jerk. this will release any remaining kinks. Push the snake through the blockage with a steady up and down motion until the snake completely breaks through. Once through lift the snake and pull the blockage up through the pipe.

Can’t get the snake down the drain?

Too much force – When you’re trying to dislodge a blockage, it can be tempting to try and force a snake cable through the drain too fast. If you force it, sometimes the cable can bend back on itself or kink. Instead of forcing the cable, extend the snake cable a few inches at a time until you reach the clog.

What chemical will unclog a toilet?

Pour 1 cup baking soda and 2 cups vinegar into the toilet. The baking soda and vinegar create a chemical process that help to dissolve clogs. Distilled white vinegar is commonly used, but any type of vinegar will work. The mixture will fizz a great deal.

How do you unclog a toilet if a snake doesn’t work?

Wait for 10-15 minutes while the dish soap and hot water soften the clog. Once you do so, the toilet will unclog and flush freely. Alternatively, you could use hot water and shampoo from the sink if you wish to clear your toilet without leaving your bathroom.

Will a plumbing snake go through a toilet?

A drain toilet snake is a long wire coil with a corkscrew-like tip that you feed into your pipes until it encounters the clog. Even the least expensive toilet snake will clear a toilet.

Is it safe to use a snake on a toilet?

Using the wrong plumber’s snake Plumbing snakes (also called drain cables) that are used to unclog sinks can actually scratch your porcelain toilet bowl.

How to use a snake to unclog a toilet?

1 Wear your protective gloves and hold up the snake in the right position. The cable should be at the front ready to get inside the toilet. 2 Position it to get inside the drain and slowly begin cranking it in. 3 Rotate the snake clockwise to unwound into the toilet drain. 4 Now crank the object counterclockwise to remove the object.

What happens if a snake gets stuck in a drain pipe?

If your plumbing snake (also known as a drain auger) gets stuck while you attempt to wrestle a blockage out of your drainpipe, you’ve obviously got a persistent obstruction on your hands. A stuck snake can be frustrating, but there are a number of ways to dislodge it.

How do you get a snake out of a jet drain?

Grab a drain brush and push it into the jet drain around the snake. The idea here is to shift the blockage around with the drain brush. If it is close enough to the surface of the bowl you may be able to move the blockage around enough that the snake comes free.

How do you get a stuck object out of a toilet?

If you can see the stuck object in the toilet, the easiest way to remove it is to grab and pull it out with your hands. Fishing it out with a hooked wire hanger work. For flushable items, a plunger is the best tool. If the object is stuck deep down in the drains, use a snake or auger.