How do you open Gardall floor safe?

One option for storage is a Gardall safe, which you can open in a few steps.

1. Turn the safe’s combination dial counterclockwise until the fourth time you reach your combination’s first number.
2. Turn the dial clockwise until the third time you reach your combination’s second number.

How do you reset the combination on a Gardall safe?

How To Change Your Code

1. Press74*
2. Press the six digits of your original code, followed by #. Wait for the lock to beep 5 times.
3. Press 1 *
4. Press the six digits of your new code, followed by #. Wait for the lock to beep 3 times.
5. Again press the six digits of your new code, followed by #. The lock will beep 3 times.

How do you open a Gardall digital safe without the combination?

Opening a Safe Without the Combination

1. First you must find the safe’s emergency key.
2. Remove the panel that covers your safe’s dial.
3. Once you have removed the dial panel, take a look beneath the dial itself.
4. Insert the emergency key into the emergency keyhole and turn it until the safe opens.

How do you change the combination on a floor safe?

Changing the Combination on an Electronic Safe Lock

1. Press the “0” key six times (you will then hear two beeps)
2. Enter your existing six-digit code (you should then hear two beeps)
3. Enter your new six-digit code (you will hear one beep)
4. Re-enter your new six-digit code (you will hear one more beep)

How do I open Gardall?

Mechanical Combination Lock

1. Turn Left stopping when the first number comes to the mark the 4th time.
2. Turn Right stopping when the second number comes to the mark the 3rd time.
3. Turn Left stopping when the third number comes to the mark the 2nd time.
4. Turn Right past “0” until the dial comes to a complete stop.

How do I change the battery in my Gardall safe?

The batteries are located on the outside of the safe in the compartment at the bottom of the keypad. It uses 4 AA batteries. Simply pop open the compartment from the bottom to change your batteries. Your code will remain in the safe even if the batteries run out!

How do you close a Gardall safe?

Start with dial on zero. Turn safe handle in the clockwise direction until it stops. To lock the safe, close the door and spin the combination dial several times.

How do you open a safe when the combination doesn’t work?

A local safe cracker (safe locksmith) will need to come out and drill the safe to force the bolts to retract and get the safe open. For cheap safes, it is often better to just break into the safe and buy a new one than hire a safe locksmith to do a professional opening and repair.

How do you open a Gardall with 3 numbers?

How do I close Gardall safe?

Use the index mark located at the twelve o’clock position. Start with dial on zero. Turn safe handle in the clockwise direction until it stops. To lock the safe, close the door and spin the combination dial several times.