How do you use Archoil friction modifier?

Add 4.8 oz of AR9100 to the gallon of oil (4 quarts x 1.2 oz per quart = 4.8 oz), and add 1.2 oz of AR9100 to each individual quart of oil. Fill your engine according to the dipstick right out of the bottles, then store the remaining treated (and labeled!) oil for topping off down the road.

What does Archoil AR9100 do?

AR9100 removes and disperses deposits and forms a friction reducing solid boundary lubricating film. By removing deposits and reducing friction, AR9100 eliminates stiction issues.

What is Archoil used for?

What Is Arch Oil Used For? ArchOIL is a leader in the development of high performance, nano-technology based lubrication and fuel treatment products. With our fuel additives, your engine will perform better and be protected from wear and tear, as well as extreme pressure and anti-corrosion.

Can I use Archoil in a gas engine?

For Gasoline Engines AR6400-G is formulated to clean gasoline engines and fuel systems. Use AR6400-G every 5,000 miles to maintain a clean fuel system and engine.

How do you use Archoil fuel treatment?

One 12 oz bottle of AR6400-D treats 40 gallons of diesel fuel. Add AR6400-D to the fuel tank at the required dosage and then add fuel. Treat 40 gallons for a complete clean. Use every 5,000 miles or as required.

How does Archoil 6200 work?

AR6200 incorporates Archoil’s combustion modification technology, leading to a significant reduction in soot and carbon build-up. The product also improves lubricity for fuel system protection and contains a powerful stabilizer and dispersant package for long term fuel storage.

Do 7.3 Powerstrokes have stiction issues?

Stiction — a combination of static and friction — occurs in the injectors of certain engines and causes hard starts, poor idle, and loss of throttle response. Although it’s most common with Ford 6.0L and 7.3L engines, stiction can be a problem on any vehicle that uses HEUI-type injectors.

Does Archoil prevent gelling?

AR6300 Winter Diesel Treatment is a concentrated fuel treatment which is added to every tank of diesel to boost performance, ensure fuel quality, protect your fuel system and protect against gelling in cold weather.

What is ar9100 oil additive used for?

Archoil’s AR9100 oil additive is suitable for use in all diesel and gasoline engines (including Cummins, Duramax and Power Stroke). AR9100 forms a solid boundary lubricating film that improves performance and protects engines, gearboxes and hydraulic systems.

Can I add ar9100 during an oil change?

If you are adding AR9100 during an oil change make sure to use less oil so there is room to add AR9100. If your dipstick shows that the oil is below the maximum mark, you can usually add AR9100 without draining oil out. For all Power Strokes remove ½ a quart (16 oz) of oil from the engine before adding a 16 oz bottle of AR9100.

How does ar9100 work?

AR9100’s extreme pressure (EP) additive forms a solid boundary lubricating film on friction surfaces, providing excellent load carrying ability under the most extreme operating conditions. AR9100 also incorporates highly polar esters that stick to metal surfaces, ensuring good penetration and protection of all engine components.

What if ar9100 does not eliminate stiction issues?

If AR9100 does not eliminate stiction issues in your 6.0L or 7.3L Power Stroke within 100 miles we will refund your purchase. How often should I treat my engine with AR9100?