What is Sto Gold Coat?
Sto Gold Coat is a code recognized, vapor permeable fluid-applied membrane designed for application under ci wall systems. Sto Gold Coat is a sheathing treatment which is part of the StoGuard air barrier and moisture barrier family of products.
What is sto emerald coat?
Sto EmeraldCoat is a ready- mixed, flexible waterproof air barrier membrane. It is applied directly to wall sheathing and functions as a vertical above grade waterproof air barrier when combined with StoGuard® joint and rough opening treatment.
What is sto guard?
StoGuard is a water-based air and moisture barrier system ideal for all types of construction. A fluid-applied system, StoGuard forms a fully-adhered seamless monolithic air and moisture barrier on the exterior wall, protecting against moisture intrusion and unwanted air movement.
Is STO a stucco?
Sto offers a number of fully-tested, warranted StoPowerwall® stucco systems and StoQuik® cement board stucco systems based on your performance requirements that include a StoGuard® air and moisture barrier component, options for a drainage mat, additional fortification layer for crack prevention, and a wide variety of …
What is the temperature in STO?
Sto Stucco Finisher dries overnight under normal conditions [70°F (21°C), 50% RH]. Drying time varies with temperature/humidity and surface conditions. Clean tools and equipment with water immediately after use.
How much does a bucket of Sto cover?
A bucket will cover about 100-250 sq. feet, depending on what texture you choose to go with. This averages out to be about $. 25-$.
What is Sto paint?
Sto Textured Coatings are acrylic based coatings used over prepared vertical concrete, stucco or masonry surfaces. They are ideal to hide minor surface imperfections. They come in a wide variety of textures and colors utilizing the StoColor System and Collections.
What is sto building material?
Sto RapidGuard™ is a single-component, multi-use air barrier and waterproof material used to seal rough openings, sheathing joints, seams, cracks, and transitions in above grade wall construction.
Which stucco is best?
Traditional Stucco vs. Traditional stucco is more durable, fire resistant, and has greater longevity, being able to last up to 50 years with low maintenance. Traditional stucco is also very porous and dries out quickly, while synthetic stucco is not and can have water damage issues if not installed properly.
What is Sto finish?
Sto Element is a ready-mixed, acrylic-based exterior or interior decorative and protective textured wall finish for use in StoTherm® ci Systems and over prepared vertical above grade concrete, masonry, stucco, and cement board substrates.
What is the fake stucco called?
Exterior Insulating and Finish System
Synthetic stucco is commonly referred to as Exterior Insulating and Finish System (EIFS).
What is Sto gold coat used for?
Sto Gold Coat Sto Gold Coat ® is a code recognized, vapor permeable fluid-applied membrane designed for application under ci wall systems. Sto Gold Coat ® is a sheathing treatment which is part of the StoGuard ® air barrier and moisture barrier family of products.
How do you apply Sto gold coating?
Apply Sto Gold Coat by spray or roller with a 1/2″ (13 mm) nap roller in a single, uniform coating at a wet thickness of 10 mils and allow drying. For air barrier, sheathing joints, rough openings, and corners must then be covered with StoGuard joint treatment.
How long does it take for Sto gold coat to dry?
Sto Gold Coat is dry to touch and can be over coated within 2-4 hours under normal conditions [70ºF (21ºC), 50% RH]. Wait 24 hours before adhesive attachment of Sto insulation board. Final drying varies depending on temperature / humidity and surface conditions. Protect from rain and freezing until completely dry.