What transformer is in the SM57?
What transformer is in the SM57?
Shure 51A303 Transformer
Shure 51A303 Transformer for SM58-LC and SM57.
Does SM57 require 48v?
Dynamic microphones sound a bit different than any other condenser mics and it do not require phantom power. So no, the SM57 doesn’t need phantom power supplied for it to work.
Does the Shure SM57 need a preamp?
The SM57 is one of those dynamic mics that needs a good amount of amplification so an external inline or outboard preamp is recommended, especially if the preamps in your audio interface, mixer or field recorder aren’t the strongest.
What cable does Shure SM57 use?
XLR cable. The Shure SM57 boasts wide frequency response (40Hz-15kHz) and a tight cardioid polar pattern that are ideal for close-in speaker miking. This package includes the SM57, a tripod boom stand and a 20′ XLR to XLR cable.
How do you mod SM57?
SM57 Mod: Modifying the Shure SM57 Microphone
- Put a pot of water on the stove.
- Unscrew the mic at its almost mid-point and snip the three wires that lead to the capsule section.
- Using a small flathead screwdriver, remove the XLR mounting screw in the XLR jack (turning counter-clockwise).
Do SM57 need phantom power?
Phantom power is a way to provide power to microphones that require electricity to operate, typically condensers. On the other hand, dynamic mics—the ubiquitous Shure SM57 and SM58, for example—do not require power.
Can SM57 take phantom power?
The SM57 is a dynamic microphone. A professional, balanced, dynamic microphone will not be damaged by phantom power. It will “ignore” it.
Is the SM57 a USB mic?
Product Details. The legendary SM57 cardioid dynamic instrument microphone is now available with the X2u USB Signal Adapter, which features built-in headphone monitoring with zero latency, and easy controls to balance microphone and playback audio.
Does Shure SM57 come with a cable?
Perfectly at home in the studio too. The Shure SM57 boasts wide frequency response (40Hz-15kHz) and a tight cardioid polar pattern that are ideal for close-in speaker miking. This package includes the SM57, a tripod boom stand and a 20′ XLR to XLR cable.
What happens if you use phantom power on a SM57?
The SM57 is a dynamic microphone. A professional, balanced, dynamic microphone will not be damaged by phantom power. It will “ignore” it.
What do I need to use a Shure SM57?
Requirements for the Shure SM57
- Whether you’re recording in a studio or on stage, you’ll need a mic stand.
- An XLR cable is also required.
- While it’s great you don’t have to worry about a dedicated pre-amp, you still need something to transmit the signal.
Are SM57’s and SM58’s really the same mic?
The SM57 and SM58 are both cardioid dynamic microphones that feature the same microphone capsule design. The main difference is that the SM58 microphone features a ball grille with a built in pop filter to reduce the plosive consonants that can sometimes occur on recordings when vocalists enunciate their “P”s and “T”s.
Who used SM57 on vocal?
The SM57 has been used on a ton of big-name vocals, most notably, Bono of U2. Flood said something to the extent of it sounding really bad (until properly mixed) but that it was worth it because of the vibe they were able to capture from Bono’s performance. The SM57 has been used on a ton of big-name vocals, most notably, Bono of U2.
Which USB interface should I get for a Shure SM57?
Quick Setup. The MVi is compatible with most devices that have a USB or Lightning connector.
What is the sm57 used for?
With its bright, clean sound and carefully contoured presence rise, the SM57 is ideal for live sound reinforcement and recording. It has an extremely effective cardioid pickup pattern which isolates the main sound source while minimizing background noise. In the studio, it is excellent for recording drums, guitar, and woodwinds.