Where is the OBD port on a Daewoo Matiz?

Where is the OBD port on a Daewoo Matiz?

OBD connector location for Daewoo Matiz (1998- 2005)

  1. OBD socket is located on passenger side.
  2. OBD socjket is under the glove box.
  3. OBD socket.

What do I do if my OBD port is not working?

The most common cause of an OBD scanner that won’t turn on is a blown fuse on the vehicle’s OBD socket power supply circuit. If the check engine light fails to aluminate, you can be sure the fuse has blown. Checking the vehicle’s fuse box and replacing the blown fuse fixes the issue.

Are all OBD plugs the same?

As a result, in 1996 car manufacturers started to equip cars and trucks with an OBD-II port. Every system is mostly the same, but there are slight variations. These are known as protocols, and are specific to vehicle manufacturers.

Can you remove your OBD port?

First remove the housing by reaching behind, pinching the sides and pushing it towards the floor. Once that part is out, the piece will be dangling by the wiring harness. Now the actual port can removed from the plastic housing by pulling the harness backward out of it (i.e. up, towards your dash).

Why is my OBD2 port not communicating?

In most cases, communication issues can be caused by various reasons including: ignition-key position, connector-voltage issues, incorrect communication protocol, hung ECM, missing or bad data, and OEM-updated ECM software that is unknown to the scan tool.

What is OBD-II connector?

The On-Board Diagnostics II (OBD-II) port is used to access the vehicle’s computer for various tasks, such as emissions tests and diagnostics. The OBD-II port is where the Hum System is installed so that the network can communicate with the vehicle directly.

What is an OBD lock?

OBD Port Lock Protector A covert tactic which leaves no visible sign of damage (usually used in combination with lock picking of the drivers door) it is a method being employed with all too common regularity, leaving unprotected vehicles hugely vulnerable.

How do I find my OBD port?

The OBD-II port is usually located under the dashboard, beneath the steering wheel column (1 – 3 in the diagram below). If not located beneath the steering column, look for the port in the areas indicated by numbers 4 – 9. For additional info, check out these Hum FAQs.