Why does my printer keep saying drum error?

Why does my printer keep saying drum error?

The message “Drum Error” will appear on the display if the corona wire on the drum unit needs to be cleaned. 1. Open the front cover and remove the drum unit and toner cartridge assembly. Be sure to place the drum and toner assembly on a piece of paper in case of spilled or scattered toner.

How do I reset my printer after replacing drums?

Reset the Drum Counter

  1. Close the front cover.
  2. Make sure the machine is turned on.
  3. Press. (Settings).
  4. Press All Settings. (This step might be skipped in some models.)
  5. Choose Machine Info. or Machine Information => Parts Life.
  6. Press and hold Drum or Drum Life until the machine’s display message changes.
  7. Press Yes.
  8. Press.

What is drum on Brother printer?

What is the drum unit? The drum unit transfers the toner to the paper. The laser printer puts the toner on the roller called “The photosensitive drum” inside the drum unit, and then prints letters and images by fixing toner to the paper by heat and pressure.

How do you fix a printer drum?

Remove the toner cartridge and drum unit from the machine. Push down the green lock lever and remove the toner cartridge from the drum unit. Unpack the new drum unit….Once the new drum is replaced, you will need to reset the drum counter.

  1. Replace Drum.
  2. Drum End Soon.
  3. Drum Stop.

What happens if you don’t replace printer drum?

A degraded drum unit can cause streaks, smudges, and blank spots on your printed page even if you just inserted a new printer toner. While a broken drum unit won’t break your printer, it will just fail to stop printing at a certain point.

How long do Brother drums last?

Under ideal conditions, the average drum life is estimated at approximately 15,000 pages. The actual number of pages that your drum will print may be significantly less than this estimate.

How do you reset the drum on a Brother printer HL 2370dw?

How to Reset Drum on Brother HL-L2370dw

  1. Make sure the printer is on.
  2. Close the front cover.
  3. Hold down the “OK” button and the “up” arrow at the same time.
  4. Press the “OK” button to select “Drum”.
  5. Select the “down” button to reset the drum counter.
  6. The printer will say accepted when drum is reset.