How do I change my digital safe code?
How do I change my digital safe code?
Enter your current digital safe combination on the keypad followed by #. Open the safe by pulling downward on the latch and pulling the safe door open. Push the red passcode reset button inside the safe door. Listen for the digital keypad to beep three times, indicating it is ready for you to enter your new passcode.
How do you open a digital home safe S 25e?
Remove the plastic key lock cover (dia 1) • Insert the override key; turn it anti-clockwise, at the same time • turn the locking knob clockwise and pull open the safe. The battery life is approximately one year.
How do I unlock sandleford safe?
Locking (Safe unlocked): Close the door. Enter 3-6 digit code followed by the “LOCK” key. The display will read “CLOSED” and the safe will now be locked. Opening (Safe locked) : Input the previously-set 3-6 digit user code.
How do you unlock a digital safe without the combination?
Opening a Safe Without the Combination
- First you must find the safe’s emergency key.
- Remove the panel that covers your safe’s dial.
- Once you have removed the dial panel, take a look beneath the dial itself.
- Insert the emergency key into the emergency keyhole and turn it until the safe opens.
How do you change the code on a sandleford key safe?
Turn the dials to the pre-set combination 0-0-0-0. 2. Move the reset button to position A as shown in picture 1. The reset button is inside, on the back of the lock mechanism.
How do I reset my sandleford lock?
Test the Safe is locked by pulling the Black Latch downwards – if locked it will not move downwards and the door cannot be opened. 5. Push the RESET Lever upward and to the right (Back to its original position. Check the Lever is fully back to its original position and it is flush against the side.
How do you change the battery in a stalwart safe?
Remove the battery cover located on the back of the Safe door. Push in the catch and carefully remove the cover. Insert 4 x 1.5V LR6 “AA” Batteries (included) accord- ing to the correct polarity as indicated on the inside of the battery compartment. Replace the battery cover to secure.
How do you change the code on a sandleford safe?
Program User Code Press the reset button. A ‘beep’ will sound. 2. Input your new user code (3-8 digits) followed by the “#” key.
What is a black box 25E safe?
Safe The Safe Black Box 25E is an ideal home safe for securing valuables and offers great value for money. The safe door is operated by a digital combination keypad, with a user changeable 3-8 digit pin code and override back up key.
How does a digital combination safe work?
The safe door is operated by a digital combination keypad, with a user changeable 3-8 digit pin code and override back up key. The lock mechanism features an anti-bounce solenoid which prevents forced, unauthorised entry to the safe.
How long does it take to install a safe?
Individual installations will vary depending on the initial site inspection of the engineer, however as a general rule we advise approx. 1 to 2 hours. What parking access is required? Our engineer will visit in a transit van style vehicle and will require adequate parking space for the duration of the install. Can you install my safe to the floor?
What is the serial number on a Sentury safe?
I bought a small Sentury Safe approximately 10″ deep x 8″ high I bought a small Sentury Safe approximately 10″ deep x 8″ high x 14″ long. It has a key and a battery operated key pad that uses 4 ea AA batteries. Serial number X055A5E0963006636.