How do I install my HP Officejet pro 8600?

HP OfficeJet 8600 Printers – First Time Printer Setup

1. Step 1: Remove the printer from the box.
2. Step 2: Install the two-sided printing accessory (duplexer)
3. Step 3: Install Tray 2 (optional)
4. Step 4: Connect the power cord and set your preferences.
5. Step 5: Load paper into Tray 1.
6. Step 6: Load paper into Tray 2 (optional)

How do I make my HP 8600 printer discoverable?

1. On the printer touch screen, touch the Right Arrow ( ) to display the second navigation screen.
2. Touch the Setup icon ( ).
3. Touch Network , touch Wireless Setup Wizard , and then touch Continue .
4. Touch the name of your network, and then touch OK .
5. If prompted, enter the network password, and then touch OK .

What replaced the HP Officejet pro 8600?

The Officejet Pro 9015 printer is the newest generation that would be comparable to the 8600 printer.

How do I enable scan to computer on HP Officejet pro 8600?

But ensure that the ‘Scan to Computer’ option is enabled.

1. Go to the windows start menu > search for ‘HP Officejet pro 8600’ and launch the application.
2. Go to > Scan > Manage Scan to Computer.
3. Make sure ‘Scan to Computer’ is enabled.

Does HP Officejet Pro 8600 have Bluetooth?

No, it does not have Bluetooth and it won’t know BT dongle. You can print using WiFi or USB cable/cord.

How do you remove the printhead on a HP OfficeJet Pro 8600?

Lift the latch handle on the carriage. Grasp the sides of the printhead, and then lift the printhead and pull it towards you to remove it. note: Do not remove the cartridges from the printhead.

How do I set up my HP OfficeJet pro 8600?

– Unplug the 8600 while powered on – Unplug the power from the router – COMPLETELY power off the iDevices, not simply put in sleep mode. – Wait 30-60 seconds – Plug the router back up and wait for it to completely power back up – Plug the 8600 back in for power – Power the iDevices back up and wait for them to sync with the network again – Try to print again

Why does my HP OfficeJet pro 8600 keep going offline?

Obtain the IP address of the printer (which can found by pressing the “wireless” icon on the printer control panel)

How to connect HP OfficeJet pro 8600 to WiFi?

– On the printer touch screen, touch the Right Arrow ( ) to display the second navigation screen. – Touch the Setup icon ( ). – Touch Network , touch Wireless Setup Wizard , and then touch Continue . The printer searches for available networks. – Touch the name of your network, and then touch OK . – If prompted, enter the network password, and then touch OK .

How to setup hp 8600 wireless printer?

Make sure the printer is turned on and connected to your network.