How do I make my floor look wet?

How do I make my floor look wet?

Apply a good quality high gloss Polymer finish to the floor: Take a large bucket and pour the finish into it. Dip a clean micro fiber flat mop into the bucket and then apply the finish on the floor with it. Use slightly overlapping strokes for better effect. The tiles will immediately look wet and shiny.

How do I polish my floor to shine?

What’s in Homemade Wood Floor Polish?

  1. 2 tablespoons of olive oil ( Purchase HERE )
  2. 1 tablespoon of distilled white vinegar ( Purchase HERE )
  3. 15 drops of lemongrass essential oil ( optional for fragrance ) ( Purchase HERE )
  4. 2 cups of warm water.

Can I use Zep Wet Look floor polish on hardwood floors?

Answer: The Zep Wet-look Floor Polish is not for use on wood or laminate floors. We recommended the Zep Hardwood & Laminate Floor Refinisher.

How do you use Zep polish?

Pour polish into a clean bucket. Using a dry rayon string mop, apply 4 coats of finish. To achieve a thin, even coat, move the mop in a continuous figure-eight motion. Allow floor to dry completely between coats to prevent hazing and to ensure adhesion; approximately 30 minutes under normal conditions.

What’s the difference between floor wax and floor polish?

The main difference between floor wax and floor polish is that floor wax is used as a protective sealant whereas floor polish is used to shine and restore.

How do I make my wood floors look wet?

  1. Step 1: Vacuum the Floor. Remove all rugs and vacuum debris from the floor.
  2. Step 2: Damp Mop the Floor. Mop the floor using a commercial floor cleaning product or your homemade cleaner.
  3. Step 3: Buff the Floor Dry.
  4. Step 4: Polish the Floor.
  5. Step 5: Wait a While.

What is the easiest way to polish a floor?

Sweep or vacuum, then mop with a commercial wood floor cleaner or solution of a quarter-cup of dish soap and a gallon of warm water to lift any lingering grime. Give the floors a final pass with a clean, water-dampened mop to remove any cleaner residue. Dry completely with a soft, clean towel.

How do you apply Zep Wet Look polish?

Apply 1–2 coats of Zep Commercial® Stain-Resistant Floor Sealer. Allow floor to dry. Apply 4 thin coats of Zep Commercial® Wet Look Floor Finish. Allow floor to dry between coats; approximately 30 minutes under normal conditions.

How long does Zep floor polish take to dry?

approximately 30 minutes
Allow floor to dry completely between coats to prevent hazing and to ensure adhesion; approximately 30 minutes under normal conditions. Do not use fans to reduce drying time.

What is Zep wet-look floor polish?

Maximum quantity available reached. Zep Wet-Look Floor Polish protects hard interior floors against spots, stains and scuffs and delivers a slip-resistant high-gloss finish. It features a 19 % solid formula that allows for easy application and minimal maintenance, leaving a long-lasting shine on vinyl floors.

How do I maintain my Zep commercial® wet look floor finish?

Zep Commercial® Wet Look Floor Finish should be maintained by frequent dust mopping and daily damp mopping with Zep Commercial® Neutral Floor Cleaner. Keep floor dust free. Maintain by dry burnishing with a beige pad.

What is polishing and how do I use it?

Polishing is the third (and most noticeable) step of the 4 step professional maintenance program. This pro grade formula leaves an attractive and glossy finish polish that resists heel marks and prevents slips in high traffic areas. For use on: interior floors such as rubber, asphalt, tile, vinyl composition tile (VCT), sealed concrete, terrazzo

What is pro grade Polish used for?

This pro grade formula leaves an attractive and glossy finish polish that resists heel marks and prevents slips in high traffic areas. For use on: interior floors such as rubber, asphalt, tile, vinyl composition tile (VCT), sealed concrete, terrazzo