How do you reset a Fritz repeater 310?

Loading the FRITZ! Repeater’s factory settings

1. Plug the FRITZ! Repeater in.
2. Wait about 1 minute until the FRITZ!
3. Push and hold down the WPS button down for about 15 seconds until all of the LEDs flash at the same time.
4. The Power and WLAN LEDs remains lit as soon as the factory settings have finished loading.

How do you pair a Fritz WLAN Repeater 310?

Establishing a wireless LAN connection using WPS

1. Plug the FRITZ! WLAN Repeater into an outlet near the FRITZ!Box.
2. Press the “WPS” button on the FRITZ! WLAN Repeater for about 6 seconds until the “WLAN” LED flashes.
3. Hold down the “WLAN” button on your FRITZ!Box until the “WLAN” LED flashes (6 seconds).

How do I reset my Fritz repeater 2400?

Push and hold down the Connect button for about 15 seconds. The status LED now indicates by alternately flashing and lighting up that the factory settings are being loaded and that the FRITZ! Repeater is being restarted. This process may take several minutes.

How do you set up a repeater?

All you have to do is place the repeater in a location that can receive your existing WiFi network, and then attach the power supply. You can then log into the WiFi repeater via your computer, and input the login details and password of your existing WiFi network, to allow the WiFi repeater to connect and extend.

What are the operation requirements for the Fritz®WLAN repeater 310?

2.1 Operation Requirements In order to operate the FRITZ!WLAN Repeater 310, you must have the following: †Your WLAN base station (WLAN access point) must sup- port the IEEE 802.11n, 802.11g or 802.11b standard in the 2.4-GHz range. †The WLAN base station must support automatic IP ad- dress assignment (DHCP).

How do I connect to WiFi using the Fritz WLAN repeater?

1. Connect the FRITZ!WLAN Repeater to an electrical outlet in the vicinity of the FRITZ!Box. 2. Press the “WPS” button on the FRITZ!WLAN Repeater. Hold the button down until the “WLAN” LED begins flashing.

How do I update the firmware of my Fritz®WLAN repeater?

Click “Wizards” and start the “Update Firmware” Wizard. The Wizard checks whether new firmware is available for your FRITZ!WLAN Repeater. If a new firmware is available, the Wizard displays the version number of the firmware. Click the link to view in- formation about the firmware.

How do I enable WPS on my FRITZ Box?

In older FRITZ!Box models, enable the WPS method in the user interface under “WLAN / Security / WPS Quick Connection”. †The WLAN base station must support the WPA or WPA2 encryption standard. †The SSID (radio network name) of the WLAN base station must be set to “visible” (announced).