How much wall clearance does a pellet stove need?

You must have 16 inches of clearance between the stove’s top to combustible materials and 3 inches of space from the stove’s vent. There should be no combustibles, such as doors or drapes, within 36 inches of the front or sides of the stove.

How close can things be to a pellet stove?

This venting system for pellet stoves permits as little as 1″ clearance from the vent sides to combustibles.

What do I put on the wall behind my pellet stove?

A heat shield can be installed on the back of a stove to help reduce the distances between the stove and any combustible materials. Heat shields are typically specific to each stove and so must be bought as an optional extra when buying a stove, or can potentially be retrofitted at a later date.

Do pellet stoves need wall protection?

Pellet stove hearths need to be constructed on non-combustible materials to protect any combustable materials on the floor of a home.

Can I vent my pellet stove straight out a wall?

Pellet stoves can be vented vertically through the roof or horizontally through a side wall. It’s always a good idea to get some vertical rise with the L-vent pipe, before venting horizontally through a side wall.

How far away from a window does a pellet stove need to be?

The rule is that a pellet stove must not terminate within four feet to the side or below opening windows or doors. This can be reduced to 18 inches if the stove uses an external air source for combustion. Above windows and doors the clearance is reduced to twelve inches, nine inches with an outside air supply.

How do I protect my walls next to the stove?

Use a Wall Protector These protectors are specifically engineered to act as a shield against heat that comes out of the stove. When you turn on the stove, you can set up the wall protector to ensure the heat remains in front of the stove rather than heading towards the wall.

Does a pellet stove need to be Wett certified?

First, the pellet stove installation should only be performed by a licensed and/or certified professional installer. Improper installation can possibly lead to fire, smoke damage, and/or carbon monoxide (CO) poisoning. Make sure your professional installer obtains a permit (if required) when installing a pellet stove.

Does a pellet stove have to be vented above the roof?

Pellet stoves can be directly vented, and do not require a full, above roof, vertical piping stack for exhaust. There is some drilling required but it’s much simpler than installing wood-burning appliances such as fireplaces and furnaces, which do require a through-the-roof vent pipe.

Can pellet stoves be vented horizontally?

While many pellet stoves can be vented with a short, horizontal vent directly out through an outside wall, most operate best with a minimum 4′ rise before the flue vents horizontally through the wall. Pellet stoves are also available as fireplace inserts installed in masonry or factory-built metal fireplaces.

How much clearance do you need around a pellet stove?

General Fire Safety Clearance Distances for Listed or Certified Wood Stoves & Pellet Stoves. 18″ on either side of the woodstove. Some codes permit 12″ clearance from the side of the wood stove to the edge of the floor protection.

How far should a pellet stove vent be from the wall?

Below are more Pellet Stove exhaust vent clearance details compiled from several installation manuals. The exhaust vent pipe must extend at least 12” (300 mm) out past the exterior wall. Install a listed horizontal termination cap or if necessary install a 90° elbow and appropriate length of vertical venting.

Where is the best location for a pellet stove?

The best placement within the room is near an exterior wall so you can vent the pellet stove directly outside. Pellet stoves heat with a flame, so safety is a major factor when determining the ideal location for installation.

How much clearance do you need for a wood stove floor protector?

Floor Protection A non-combustible floor protector should extend at least 18″ on either side of the woodstove. Some codes permit 12″ clearance from the side of the wood stove to the edge of the floor protection.