Is ardex a good brand?

For more than 70 years, ARDEX has been the quality leader for an entire industry, offering engineered products and systems in the areas of: floor levelling and adhesives, tile and natural stone systems, sheet and liquid applied waterproofing membranes, general construction and decorative surfaces.

What is ardex used for?

ARDEX CD™ is a concrete resurfacing compound modified with high-performance polymers for exceptional bond strength. ARDEX CD can be used over the surface of existing concrete to produce a new wear layer as well as to fill in small surface defects, such as spalls and gouges.

Does ardex need a primer?

NON-POROUS SUBSTRATES: ARDEX FEATHER FINISH will bond to some non-porous substrates, such as burnished concrete, terrazzo, and ceramic and quarry tile, without the use of a primer.

Is ardex a Dunlop?

Dunlop Distribution Building Adhesives Ltd was founded in 1962 as a development centre for the British ceramic tile industry, the Company is a wholly owned subsidiary of Ardex GmbH, Germany.

Where are Ardex products made?

ARDEX GmbH is a manufacturer of special materials for the building trade with its global headquarters based in Witten….Ardex GmbH.

Is ardex safe?

Hazard Statements Causes skin irritation. Causes serious eye damage. May cause cancer by inhalation. Causes damage to lungs through prolonged or repeated inhalation.

What’s the difference between Ardex CD and Ardex CD FINE?

ARDEX CD covers 2-1/3 – 3 sq. ft. per pound and ARDEX CD FINE covers 5-6 sq. ft.

How thick can ardex be installed?

ARDEX K 521™ is a pourable, polishable, self-leveling topping for fast-track resurfacing of indoor concrete. ARDEX K 521 can be installed from a minimum thickness of 3/8″ (9 mm) up to a maximum thickness of 2″ (5 cm).

What is Ardex CD?

We look forward to hearing from you, and we’ll be in touch shortly. ARDEX CD™ is a concrete resurfacing compound modified with high-performance polymers for exceptional bond strength. ARDEX CD can be used over the surface of existing concrete to produce a new wear layer as well as to fill in small surface defects, such as spalls and gouges.

What is the mix ratio for Ardex CD fine?

Once applied, ARDEX CD FINE can be broom textured before it sets for a reduced-slip surface. Mixing Ratio: 2 1/2 quarts (2.4 L) of water per one 20 lb. (9 kg) bag; for smaller batches, mix 2.75 parts powder to 1 part water by volume.

Are there any shipping restrictions for Ardex CD?

Hazardous material shipping restrictions apply. You may be contacted by Customer Service if an alternate shipping method is required. ARDEX CD is a concrete resurfacing compound modified with high-performance polymers for exceptional bond strength.

Who is Ardex?

Founded in 1949, ARDEX has been strong for over 70 years. The ARDEX Group is comprised of 53+ subsidiaries, 36+ production facilities. On this website we use tracking technology and contents from third parties, some are based on cookies.