Where is drain plug located?

The drain plug is a large nut or plug located under the oil pan at the bottom of the engine.

Where is the engine drain bolt?

An oil drain plug is a large nut usually located in the lowest point of the oil pan at the bottom of the engine where all engine oil capacity rests.

Where is the engine oil drain?

Removing the oil filter Place the drain can directly under the oil filter – usually on the side of the engine crankcase . The filter can be one of two types – either a throwaway cartridge or, on older cars, a replaceable element inside a metal bowl. A throw-away cartridge is usually unscrewed complete.

What is a drain plug on a car?

drain plug in Automotive Engineering A drain plug is a plug which is taken out to allow a fluid to be drained from a tank such as an engine oil pan or sump. Remove the oil drain plugand allow oil to drain out. Remove the drain plug under the engine with the wrench, and let the oil flow into the pan.

How much is a drain plug?

The general range is between $100 and $350, but there are some vehicles that cost more. You can get an oil pan gasket replacement for between $40 and $150. The part is not the most expensive part of the repair, but the labor can be very intensive.

How do you open a drain plug?

Set the drain to its open position. Unscrew the knob on the top of the drain stopper to see if there is a set-screw underneath. If your drain stopper has a set-screw, use a small screwdriver or a hex key to unscrew it. Twist the entire stopper counterclockwise until it pulls free from its mounting post.

Which way do you turn an oil drain plug?

The engine oil screw can be found near the front of the vehicle. The wrench should be used to loosen the plug in a counterclockwise direction when you plug in the socket. The plug can then be removed once you are relaxed. As soon as the hot oil is poured out, it will begin to evaporate.

How do you completely drain oil?

Remove the drain plug by loosening it (counterclockwise) with the proper wrench and unscrewing it. Hold on to the drain plug as you remove it; the oil will start pouring out as you pull it away from the oil pan. Allow the engine to drain for five minutes or until the flow of oil has slowed to a trickle.

What oil does Hyundai Getz use?

Hyundai genuine oil synthetic 10W-30 SM/CF is a shear-stable, multi grade engine oil for use in Hyundai passenger car, SUV and light commercial vehicle petrol engines where oils of performance up to and including ILSAC GF-4, or API SM/CF are recommended.

Where is the fuel filter located on a Hyundai Getz?

Either way the fuel filter of your hyundai getz will be in the fuel system. Therefore it will be located between the tank and the carburetor. You will be able to spot it thanks to its cylindrical shape with 2 rods and it is connected by 2 hoses.